Instruction:
The disc tensioner is installed in front of the barrel yarn. After the warp is led out from the package, through the baffle and from the magnetic hole, it is led out after winding a column or three columns between the upper tension plate and the lower tension plate. The position of the tension plate can slide at the groove to adjust the warp surrounding angle.

The warp tension depends on the following factors
1. The number of warp bypassing the tension disc. The more the number of warp bypassing the tension disc, the greater the tension.

2. For the winding mode of the tension disc of warp to column, the larger the surrounding angle of warp to column, the greater the tension.

3.The weight of the upper tension disc, the weight of the upper tension disc increases, and the tension of warp yarn also increases. The tension pieces supplied randomly vary slightly due to different models, generally including 1.5cn, 2cn, 3.2cn, 5CN, etc.

Products Image:                                                                                      

Packing and Delivery:

1.Carton package suitable for air and sea shipment.

2.Delivery normally is one week.

Contact us:                                                                                            

· Website:http://topt-textile.en.alibaba.com

· Contact: Simple Peng

· Cellphone: 0086 15901975012

- weChat: 008615901975012

·